+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=60)
+--- Forum: B16M (https://www.kincony.com/forum/forumdisplay.php?fid=61)
+--- Thread: Problem flashing firmware (/showthread.php?tid=7313)
Pages:
1
2
RE: Problem flashing firmware - admin - 09-09-2025
because your B16M, two "DC" green terminal have not connect with power supply's voltage. for example, if you power supply is DC12v, you need also connect “DC” with 12v.
RE: Problem flashing firmware - FELIX - 09-21-2025
(09-09-2025, 12:41 AM)admin Wrote: because your B16M, two "DC" green terminal have not connect with power supply's voltage. for example, if you power supply is DC12v, you need also connect “DC” with 12v.
thanks everything works perfectly
RE: Problem flashing firmware - admin - 09-21-2025
ok