Smart Home Automation Forum

Here is "KCS" firmware for KinCony M30 AC energy meter board.
Download fimrware by USB-C cable via ESP32 Download Tool.
firmware BIN file download: [attachment=5853]
ESP32 Download tool download link
[attachment=5854]
[attachment=5855]
KCS firmware for M30
[attachment=5856]
Monitor all channels for Current, Voltage, Power, Energy, Frequency, chip Temperature
[attachment=5857]
[attachment=5858]
setting for MQTT-1 and MQTT-2. MQTT-1 connect to your own private MQTT cloud server. MQTT-2 use for home assistant MQTT broker. If you want to use Auto Discovery function, just enable it.
[attachment=5859]
M30 can be auto discovery in home assistant.
[attachment=5860]
all KinCony M30 entities use in home assistant directly.
[attachment=5861]

Hi, Can you adapt this firmware for all KCS firmware compatible devices ? 
it would be awesome

will adapt for new models.

(09-02-2024, 01:59 PM)admin Wrote: [ -> ]will adapt for new models.

Will there be a version for the M16 plate?

no new firmware for M16

(09-28-2024, 12:54 AM)administracja Wrote: [ -> ]brak nowego oprogramowania dla M16

Is there any older software for the M16 available?

just config by ESPHome, no other software.