Smart Home Automation Forum

I've a few KC868_A32M  and A16

I'm trying to subscribe to the state of a single output instead of the whole board.

On NodeREd I wanted to subscribe to a topiic like: [attachment=6170]

KC868_A32M/E05A1B5BE4C8/STATE/output1


So only changes to output1 would trigger an action. Is it possible or is this something for a future firmware update ?

here showed KCS v2 mqtt document: https://www.kincony.com/forum/attachment.php?aid=2872
if you are using KC868-A32M, the command topic should be: KC868_A32M/XXXXXXXXXXXX/SET
XXXXXXXXXXXX replace with your A32M's serial number.