Smart Home Automation Forum

Full Version: Kcs output off after x seconds

You're currently viewing a stripped down version of our content. View the full version with proper formatting.

Hi,

How can we let kcs automatically off the output, example output 1, 10 seconds after it is triggered on through api (http://192.168.1.99/ctrl.cgi?secret=&set...=1&value=1)

download KCS v2 firmware, create IFTTT command. INPUT trigger customsize command.
here is KCS v2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html

stanchiam