02-15-2025, 03:32 AM
Note: This protocol document use for KinCony ESP32-S3 smart controller:
you need to download KCS v3 firmware to ESP32-S3 firstly.
Different board will have different channel of digital output, digital input , ADC, DAC,IR, RF. So the protocol is same , just according to the hardware resource to set channel number.
[attachment=7122]
for IR commands:
[attachment=7129]
[attachment=7127]
[attachment=7128]
you need to download KCS v3 firmware to ESP32-S3 firstly.
Different board will have different channel of digital output, digital input , ADC, DAC,IR, RF. So the protocol is same , just according to the hardware resource to set channel number.
[attachment=7122]
for IR commands:
[attachment=7129]
[attachment=7127]
[attachment=7128]