+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-Server Raspberry Pi4 local server (https://www.kincony.com/forum/forumdisplay.php?fid=17)
+--- Thread: KC868-Server Raspberry Pi4 local server (/showthread.php?tid=6477)
Pages:
1
2
RE: KC868-Server Raspberry Pi4 local server - fdcemb5 - 08-28-2024
(08-27-2024, 11:53 PM)admin Wrote: now you can use "Raspberry Pi Imager" download home assistant firmware, it's newest way. just chose home assistant firmware, directly to download. i am not sure why your home assistant have this issue, maybe try to use another install way for a test will find something.
The Pi Imager is not seeing the eMMC. Is there a way I integrate standalone PI installed home assistant to work with the KC868 - server and other boards
RE: KC868-Server Raspberry Pi4 local server - admin - 08-28-2024
1. if you want write image to eMMC, you need change BOOT jumper, then your computer will find the disk of eMMC.
2. sure, you can use any device installed home assistant, then integrate KC868-Server to other boards.
RE: KC868-Server Raspberry Pi4 local server - fdcemb5 - 08-29-2024
I have successful installed Home Assistant on eMMC after series of delving with other techniques but it is empty. I have to start on boarding. How do I integrate the inbuilt kc868 - control and other boards such as H32B Pro to it. Step by step will be appreciated. Unfortunately I did not do any backup. It is a learning process for me. Thanks for your help
RE: KC868-Server Raspberry Pi4 local server - admin - 08-29-2024
let KC868-Server and KC868-H32B Pro controller integrate to home assistant by MQTT.
here is guide use by KC868-H32B Pro: https://www.kincony.com/kc868-h32b-integrate-home-assistant-by-mqtt.html
if you want integrate KC868-Server 16 channel OUTPUT , just modify the MQTT topic name. here is config yaml file: https://www.kincony.com/forum/showthread.php?tid=1780
RE: KC868-Server Raspberry Pi4 local server - fdcemb5 - 08-29-2024
(08-29-2024, 08:46 AM)admin Wrote: let KC868-Server and KC868-H32B Pro controller integrate to home assistant by MQTT.
here is guide use by KC868-H32B Pro: https://www.kincony.com/kc868-h32b-integrate-home-assistant-by-mqtt.html
if you want integrate KC868-Server 16 channel OUTPUT , just modify the MQTT topic name. here is config yaml file: https://www.kincony.com/forum/showthread.php?tid=1780
I have managed to write the yaml for hc868 server and h32b_pro. kc868 server 16 channel can trigger the relays/contactors from the home assistant. H32B_Pro cannot trigger the relays from home assistant. All configs seems fine, as per the screenshots. What could be responsible?
RE: KC868-Server Raspberry Pi4 local server - admin - 08-29-2024
your mqtt topic is wrong. if use KC868-H32B Pro, your mqtt topic should:
state_topic: ‘relay32/xxxxxxxxxxxxxxxx/state’
command_topic: ‘relay32/xxxxxxxxxxxxxxxx/set’
RE: KC868-Server Raspberry Pi4 local server - fdcemb5 - 09-01-2024
After the installation of HA OS on eMMC, all the USB ports are not accessible. I have followed the thread on this, but my eMMC boot drive is not accessible although it appears on the USB icon. Any click will unmount the eMMC drive. Any help how to make the eMMC accessible to enable the USB ports.
RE: KC868-Server Raspberry Pi4 local server - admin - 09-01-2024
https://www.kincony.com/forum/showthread.php?tid=1980