+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" v2 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: "KCS" v2.2.10 firmware BIN file download (/showthread.php?tid=7283)
RE: "KCS" v2.2.10 firmware BIN file download - Poczwara13 - 01-16-2025
Hello,
will it be possible to export and import IFTTT in the future??
RE: "KCS" v2.2.10 firmware BIN file download - admin - 01-17-2025
(01-16-2025, 02:51 PM)Poczwara13 Wrote: Hello,
will it be possible to export and import IFTTT in the future??
will design this in future.
RE: "KCS" v2.2.10 firmware BIN file download - Peter_El - 01-17-2025
Hello,
I'm having problems flashing the KCS_KC868_A16_V2.2.10.bin to a newly purchased KC868-A16.
I did everything according to her instructions.
The USB interface is OK, the transfer shows a series of progress points - but they don't end.
If I press the download button an error message appears. That means my PC somehow communicates with your card.
I tried different Windows 7, 10 and 11 PCs, no difference.
I suspect a defective ESP.
RE: "KCS" v2.2.10 firmware BIN file download - admin - 01-18-2025
you should chose chip type "ESP32", NOT "ESP32-S3".
RE: "KCS" v2.2.10 firmware BIN file download - davidecioi - 01-19-2025
Why is the firmware version 2.2.10 not provided for the A24 card which unfortunately remained only at version 2.2.2?
RE: "KCS" v2.2.10 firmware BIN file download - admin - 01-19-2025
(01-19-2025, 08:22 PM)davidecioi Wrote: Why is the firmware version 2.2.10 not provided for the A24 card which unfortunately remained only at version 2.2.2?
yes, A24 not updated.
RE: "KCS" v2.2.10 firmware BIN file download - Poczwara13 - 01-22-2025
(01-17-2025, 12:02 AM)admin Wrote:(01-16-2025, 02:51 PM)Poczwara13 Wrote: Hello,
will it be possible to export and import IFTTT in the future??
will design this in future.
In the distant future?? Is it a matter of days or month?? I ask because I have control based on IFTTT to prepare, which would be a great convenience.
RE: "KCS" v2.2.10 firmware BIN file download - admin - 01-22-2025
it will be a long time, not easy, not soon. will design based on KCS v3.
RE: "KCS" v2.2.10 firmware BIN file download - csacomani - 01-23-2025
The "auto send ADC values" function is not working in KCS V2.2.10!
With this function active I should receive messages in my MQTT every 5 seconds, this is not happening!
I am using the K868-A4 board.
RE: "KCS" v2.2.10 firmware BIN file download - admin - 01-24-2025
(01-23-2025, 08:40 PM)csacomani Wrote: The "auto send ADC values" function is not working in KCS V2.2.10!
With this function active I should receive messages in my MQTT every 5 seconds, this is not happening!
I am using the K868-A4 board.
do you have set the "threshold" for every ADC channel, just click "gear" ico to set.