+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KinCony integrate with Loxone home automation (https://www.kincony.com/forum/forumdisplay.php?fid=19)
+--- Thread: Loxone RS485 (/showthread.php?tid=8320)
Pages:
1
2
RE: Loxone RS485 - marekzerzan - 12-29-2025
Thank a lot, now is working for me as expected
btw: I bought this one for playing but I am plannig buy bigger one for real hoe project, but Thinking about
ESP32 Tiny Smart Controller – T128M (128CH MOSFET)
or
KC868-A128 Arduino ESP32 128 Channel GPIO Module
I need only some inputs and lot of outputs for relays (1 type relya for shading of window - 24 V and second type of relay for 24V / 16A max.)
I am planning to control this 2 types of relay with 24 V DC.
Which type do you recommend me?
RE: Loxone RS485 - admin - 12-29-2025
T128M made by ESP32S3, use by KCS v3.
A128 made by ESP32, use by KCS v2.
use T128M is better, it also have cover, A128 without cover.