+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5)
+--- Thread: kc-868 AK (/showthread.php?tid=8342)
Pages:
1
2
RE: kc-868 AK - Saif Kitany - 08-04-2025
I set this condition in KC-868 AK, the IF is time condition and THEN is protocol1+protocol2+protocol3+protocol4.
The protocols programed to tuggle Relay in H32B:
Protocol1—-> toggle relay 21
Protocol2—-> toggle relay 22
Protocol 3—-> toggle relay 23
Protocol 4——> toggle relay 24
But the problem i faced, is when i run the condition, it just operates the protocols in the first line, which is protocol1+protocol2.
Protocol 3 and 4 are not operating!!!
What i miss in the case?
RE: kc-868 AK - admin - 08-04-2025
post your 4 protocol content screen photo. how you define.
RE: kc-868 AK - Saif Kitany - 08-04-2025
Protocols content photo:
RE: kc-868 AK - admin - 08-04-2025
between every THEN protocol action, add delay time, such as 1 second.
RE: kc-868 AK - Saif Kitany - 08-04-2025
I added delay 1s like in the picture, and i see it’s working well.
Now the strange part is, without adding delay, i face the problem that i described in the beginning with H32B, and also A32pro.
But with A8v3 it works well(even without delay)!!!
Can you explain what is going here?
RE: kc-868 AK - admin - 08-04-2025
A8v3 use by ESP32S3, the CPU is faster than H32B's CPU.
but add delay is a stable way.