+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A32/A32 Pro (https://www.kincony.com/forum/forumdisplay.php?fid=27)
+--- Thread: Connection to the Home Assistant app? (/showthread.php?tid=2533)
RE: Connection to the Home Assistant app? - admin - 02-02-2025
(02-01-2025, 05:10 PM)wchpikus Wrote: hello i try to add kc868-a32 mqqt to HA but in config file i got errors..
mqtt:
switch:
- name: 'output-1'
unique_id: output-1
state_topic: 'server/8ae082ec66f37db231cf2b8f/state'
command_topic: 'server/8ae082ec66f37db231cf2b8f/set'
payload_on: '{"relay1":{"on":1}}'
payload_off: '{"relay1":{"on":0}}'
value_template: '{{ value_json.relay1.on }}'
state_on: 1
state_off: 0
bad indentation of a sequence entry (141:8)
138 | - topic: "Esp32-rolety/connected"
139 |
140 | #Kincony hc868-a32
141 | mqtt:
--------------^
configuration.yaml.
is any example working with 14.02 HA?
It could be syntax error on yaml now, but i am weak on the yaml files.
your command and state TOPIC is wrong, please check with our mqtt protocol document.
RE: Connection to the Home Assistant app? - lulu01 - 02-02-2025
admin I downloaded the sample YAML config file here
https://www.kincony.com/forum/showthread.php?tid=2543
and the indentation in the file is not correct: there is an extra blank space before the lines I highlighted. I think this explains the error about the indentation.
wchpikus you should correct this, and then also replace 8ae082ec66f37db231cf2b8f with the serial of your own card.
RE: Connection to the Home Assistant app? - admin - 02-03-2025
for example, here is relay1 of KC868-A32:
Code:
mqtt:
switch:
- name: 'a32-kcs-output-1'
unique_id: a32-kcs-output-1
state_topic: 'KC868_A32/08F9E08B1F58/STATE'
command_topic: 'KC868_A32/08F9E08B1F58/SET'
payload_on: '{"output1":{"value":true}}'
payload_off: '{"output1":{"value":false}}'
value_template: '{{ value_json.output1.value }}'
state_on: true
state_off: falseRE: Connection to the Home Assistant app? - iozzi_giorgio - 05-04-2025
hello
I'm trying to connect the kc868 a32 board with home assistant via mqtt.
how can I make the outputs be recognized as lights? I also bought an rs485 interface for buttons? how can I recognize? instead for analog inputs?
thanks
RE: Connection to the Home Assistant app? - admin - 05-04-2025
this is A8S integrate by mqtt sample, A32 is similar, just modify the topic:
https://www.kincony.com/forum/showthread.php?tid=3274