+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" v2 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: "KCS" v2.2.10 firmware BIN file download (/showthread.php?tid=7283)
RE: "KCS" v2.2.10 firmware BIN file download - кшырфе1985 - 01-25-2025
Я использую плату K868-A16 но при подключении датчика температуры ds18b20 точность 0,5°С хотя датчик может мерить 0,1°С
RE: "KCS" v2.2.10 firmware BIN file download - AreaKode - 02-06-2025
Is there a version available for the KC868-ATC? Thanks!
RE: "KCS" v2.2.10 firmware BIN file download - admin - 02-06-2025
(02-06-2025, 02:09 AM)AreaKode Wrote: Is there a version available for the KC868-ATC? Thanks!
no, KC868-ATC only have arduino firmware. Not use by KCS firmware.
RE: "KCS" v2.2.10 firmware BIN file download - acztassi - 02-15-2025
hello!!!
i`m having a problem with this version ..
when using ethernet and i make a simple configuration in IFTTT like:
- WHEN DI1 IN BOTH EDGE ... THEN TOGGLE DO1
and in output menu I setup the DO1 to delay (20 seconds) then the ethernet blocks...
even the RJ45 connector leds turn OFF..
tested in A16 and AIO and both boards have the same problem
i tired to turn off and turn on the board... then it start well but a few time after the problem continues and the ethernet stops again
if I only remove the delay configuration to "hold on".. all restart working fine
RE: "KCS" v2.2.10 firmware BIN file download - admin - 02-15-2025
next week we test it.
RE: "KCS" v2.2.10 firmware BIN file download - draugen - 02-18-2025
Hi (KC868-A6)
Seems like the sensor function has some problems at least when posting to mqtt
I have 2 sensors
- A DS18B20 that seems to have a lot of spurious readings
- A DHT22 that seems to sit on one value for a very long time, even if other sensors close by shows temperature variations way above the threshold
![[Image: 2025-02-18_04_51_38.png]](https://www.riple.no/filer/2025-02-18_04_51_38.png)
Other than that it seems like a great product!
RE: "KCS" v2.2.10 firmware BIN file download - admin - 02-21-2025
1. About DHT22, whether update value in KCS monitor webpage?
2. do you integrate to home assistant by ESPHome yaml? or by MQTT?
RE: "KCS" v2.2.10 firmware BIN file download - draugen - 02-21-2025
The DHT22 does not update more frequently on the Monitor page than on mqtt. Looks to me as if the temperature over n time does not increase above thresold, then the new current temperature is used as reference.... ie if the temperature continue too increase slowly the valve is never update on webpage/mqtt. If temperature change quickly it seems to work
The spurious readings on ds18b20 is hard to catch on monitor page soo not 100% sure if that also occurs on Monitor page.
Currently I have set the KC868 to connect to a mosuitto server directly (mqtt). Have no automations running here now, but have a simple node-red dashboard to visualise the readings from the mqtt server.
RE: "KCS" v2.2.10 firmware BIN file download - admin - 02-22-2025
yes, you can test with mqtt broker, monitor the mqtt state topic. maybe you can record a video send to us by google driver or whatsapp number: +86-15381188302
RE: "KCS" v2.2.10 firmware BIN file download - draugen - 02-24-2025
(02-22-2025, 12:57 AM)admin Wrote: yes, you can test with mqtt broker, monitor the mqtt state topic. maybe you can record a video send to us by google driver or whatsapp number: +86-15381188302
Logfile
about 12 hours log, seems to be better than normal though. Still static readings for the DHT22 and some spurious on the DS18B20.