+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-M16 / M1 / MB / M30 (https://www.kincony.com/forum/forumdisplay.php?fid=50)
+--- Thread: KC868-M16v2 configure yaml for ESPhome (/showthread.php?tid=3088)
RE: KC868-M16v2 configure yaml for ESPhome - admin - 04-13-2025
i use esphome compiled this BIN file, it use by ethernet, you can download to ESP32, test whether work well.
m16v2.factory.zip (Size: 482.58 KB / Downloads: 319)
RE: KC868-M16v2 configure yaml for ESPhome - athxp - 04-13-2025
I tried but it didn't work...what is the associated yaml file?
it still seems that the card can't connect to the network
RE: KC868-M16v2 configure yaml for ESPhome - admin - 04-13-2025
do you MUST want to use ethernet?
when you bought M16v2 from? tell us your order number, we will check.
RE: KC868-M16v2 configure yaml for ESPhome - athxp - 04-14-2025
I would like to use ethernet, I bought the card with poe module on purpose. I bought it on 26-01-2025, with Express checkout.
the email is athxp(@)tiscali(dot) it
RE: KC868-M16v2 configure yaml for ESPhome - admin - 04-14-2025
send your order number and store link to whatsapp number: +86-15381188302 we check for you.
RE: KC868-M16v2 configure yaml for ESPhome - athxp - 04-28-2025
do you have a telegram contact?
now I'm using the card with wifi, I haven't found a way via cable. I think the rj45 module is faulty...
now I'm using the card with wifi, I haven't found a way via cable. I think the rj45 module is faulty...
RE: KC868-M16v2 configure yaml for ESPhome - admin - 04-28-2025
telegram: +86-15381188302
RE: KC868-M16v2 configure yaml for ESPhome - athxp - 05-05-2025
I contacted via telegram but I had no response....is the contact active?
RE: KC868-M16v2 configure yaml for ESPhome - admin - 05-06-2025
because the same question you send to whatsapp and telegram repeatly. by one chat way is enough.
RE: KC868-M16v2 configure yaml for ESPhome - The_Muffin_Man - 06-21-2025
Hi, I have just bought the KC868-M16-V2.1 and I'm having the same issue display is working with temp and humidity reading but I have no Ethernet working.
I have tried the m16v2.factory.zip and the yaml example supplied in this thread with no luck.
If i use the yaml example for the KC868-M16 the Ethernet works fine but I have no display, temp or humidity
I had the same issue with no Ethernet but I was able to resolve it by using esptool to erase and flash the m16v2.factory.bin
esptool -p /dev/ttyUSB0 erase_flash
esptool --chip esp32 -p /dev/ttyUSB0 -b 115200 write_flash 0x0 m16v2.factory.bin
Now Ethenet works and so does the display.