+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: kc868h2b firmware (/showthread.php?tid=1202)
kc868h2b firmware - Patrick - 11-24-2021
can this controller be updated from version 4.13.26
allow for MQTT option? 4.13.26 4.13.26 4.13.26
RE: kc868h2b firmware - admin - 11-24-2021
if replaced the CPU chip with new version , H2B can support MQTT.
RE: kc868h2b firmware - Patrick - 11-25-2021
ok. did not pull cover to see chip. did not find closeup image of kc868h2b board on internet
web interface and firmware version very similar to h32b.
RE: kc868h2b firmware - admin - 11-25-2021
if want to use MQTT, KC868-H2B should use CPU "AT32F415CBT7"