[Arduino IDE demo source code for KC868-AG]--#01-433Mhz send code

Code:
#include <RCSwitch.h>

RCSwitch mySwitch = RCSwitch();



void setup() {

  Serial.begin(9600);

  mySwitch.enableTransmit(digitalPinToInterrupt(22)); //IO22 433Mhz send pin

}



void loop() {

  mySwitch.switchOn("11111", "00010");

  delay(1000);

  mySwitch.switchOff("11111", "00010");

  delay(1000);



  mySwitch.send(5393, 24);

  delay(1000);  

  mySwitch.send(5396, 24);

  delay(1000);  



  mySwitch.send("000000000001010100010001");

  delay(1000);  

  mySwitch.send("000000000001010100010100");

  delay(1000);



  mySwitch.sendTriState("00000FFF0F0F");

  delay(1000);  

  mySwitch.sendTriState("00000FFF0FF0");

  delay(1000);

}