+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-AG/AG Pro (https://www.kincony.com/forum/forumdisplay.php?fid=30)
+--- Thread: [Arduino IDE demo source code for KC868-AG]--#03--IR send code (/showthread.php?tid=1675)
[Arduino IDE demo source code for KC868-AG]--#03--IR send code - KinCony Support - 01-27-2022
Code 3: //The demo code is IR SEND code You can copy the code to your Arduino IDE
Code:
#include "PinDefinitionsAndMore.h"
#include <IRremote.h>
void setup() {
Serial.begin(9600);
IrSender.begin(IR_SEND_PIN, ENABLE_LED_FEEDBACK);// IR_SEND_PIN is defined in PinDefinitionsAndMore.h file
}
uint16_t sAddress = 0x78;
uint8_t sCommand = 0xCD;
uint8_t sRepeats = 0;
void loop() {
IrSender.sendNEC(sAddress, sCommand, sRepeats);
delay(1000);
}you can download the zip file.
KC868-AG_IR_send.zip (Size: 3.14 KB / Downloads: 236)