KC868-H4 Relay - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1) +--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2) +--- Thread: KC868-H4 Relay (/showthread.php?tid=171) |
KC868-H4 Relay - opfinder - 01-04-2021 Hi There What is the correct cmd to turn on off relay on this (board is TCP server) I can connect but no answer, have try with following cmds RELAY-SET-1,1,1 / RELAY-SET-1,1,0 that is what you own software is sending (Relay.Exe), here is allso no respons have allso try with these cmd's RELAY-SET-255,1,1 / RELAY-SET-255,1,0 this work for me with KC868-H16 RE: KC868-H4 Relay - admin - 01-04-2021 now use RELAY-SET-255,1,1 is correct. first byte is alway fixed by 255 in any protocol command. the old version is use RELAY-SET-1,1,1 , if you use -1 , you need send initialization command firstly. so now we suggest use -255, it's easy to use, without send initialization command is ok. |