Smart Home Automation Forum
KC868-A4 and A8 plastic enclosure 3D printer stl file - Printable Version

+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A8 (https://www.kincony.com/forum/forumdisplay.php?fid=23)
+--- Thread: KC868-A4 and A8 plastic enclosure 3D printer stl file (/showthread.php?tid=2028)

KC868-A4 and A8 plastic enclosure 3D printer stl file - admin - 10-07-2021

thanks for "Calin Mihai Cioci" from UK, the 3D stl file design by him. more details about his KC868-A4 project, see this link:
http://calincioci.uk/kinconya4/

3D print files for Base:
[Image: 3D_base_printed-pix800.jpg]

[Image: A4_board_temp_humidity_air_soil_sensor-pix800.jpg]
https://www.kincony.com/images/KC868-A4/KinCony_base_A4.stl
https://www.kincony.com/images/KC868-A4/KinCony_base_A4.step

RE: KC868-A4 and A8 plastic enclosure 3D printer stl file - robbansson - 04-16-2024

But this is for A4, is there a version for A8?
or a step file of the A8 board had been great!

RE: KC868-A4 and A8 plastic enclosure 3D printer stl file - admin - 04-16-2024

A4 and A8 use same shell, size is same.

RE: KC868-A4 and A8 plastic enclosure 3D printer stl file - Mosfet3 - 05-20-2024

And shell for the A8, completly closed. Need to use SonOff din rail bracket. 

https://www.mediafire.com/file/6oidqkily17osze/A8+Shell.rar/file

RE: KC868-A4 and A8 plastic enclosure 3D printer stl file - admin - 05-20-2024

good job, thanks.

RE: KC868-A4 and A8 plastic enclosure 3D printer stl file - EddyLee - 09-09-2024

I also like to share Angel .
https://www.thingiverse.com/thing:6665458
I also uploaded the STEP file to Thingiverse so that I could make further changes in Fusion360.

Greetings Edi

RE: KC868-A4 and A8 plastic enclosure 3D printer stl file - admin - 09-09-2024

good job,thanks share your file.

RE: KC868-A4 and A8 plastic enclosure 3D printer stl file - Tim1401 - 08-01-2025

(05-20-2024, 07:56 AM)admin Wrote: good job, thanks.

Hallo, ich habe eine Frage zu dem Gehäuse.
Kann man nicht einfach das Originalgehäuse hernehmen und nur den oberen Teil dran machen wo die Schalter und LED´s verbaut sind und das auf das Originalgehäuse draufschrauben?
Ich hab noch kein Gehäuse und weiß nicht ob das möglich ist, damit erspart man sich ja einiges an druck und Material.
Gruß