+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-AP / ADR (https://www.kincony.com/forum/forumdisplay.php?fid=38)
+--- Thread: [Arduino source code for KC868-AP]-03 _RS485_communication (/showthread.php?tid=2487)
[Arduino source code for KC868-AP]-03 _RS485_communication - KinCony Support - 01-03-2023
[Arduino source code for KC868-AP]-03 _RS485_communication
Code:
void setup() {
Serial.begin(115200);
Serial2.begin(115200,SERIAL_8N1,33,14);
Serial2.println("RS485 SEND is OK!!");
Serial2.println("******************");
}
void loop() {
/*print the received data of RS485 port*/
while(Serial2.available()>0)
{
Serial2.print((char)Serial2.read());//Read rs485 receive data and print it
}
delay(200);
}