BIN firware file to upload - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20) +--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40) +--- Thread: BIN firware file to upload (/showthread.php?tid=2534) |
BIN firware file to upload - lcristofalo - 01-25-2023 Which and Where is the binary file to be flashed for the board KC868-A8S ? Can this be used with RS-485 port to Read DI and SET/REST relays? Thanks. RE: BIN firware file to upload - admin - 01-25-2023 Which and Where is the binary file to be flashed for the board KC868-A8S ? --> after about 1 day will upload. Can this be used with RS-485 port to Read DI and SET/REST relays? --> sure, RS485 support by modbus protocol. RE: BIN firware file to upload - lcristofalo - 01-25-2023 Great, modbus protocol will greatly resolve my problem. Please tell us function codes to be used for: - get Digital Inputs - get Analof Inputs - SET/RESET relays If you can provide sample commands in HEX or ASCII codes will be wonderful (or if exists, provide a document with full command list) In this way we can develop our own application autonomously for any platform and integrate KC868-A8S in our equipment boxes. Thanks & Regards RE: BIN firware file to upload - admin - 01-25-2023 here is modbus protocol document , it showed sample of your needs: https://www.kincony.com/forum/showthread.php?tid=2528 we will upload BIN file these days. because of new year holidays, we are ready back to work. RE: BIN firware file to upload - admin - 01-26-2023 BIN file download at here: https://www.kincony.com/forum/showthread.php?tid=2536 |