+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-ASR (https://www.kincony.com/forum/forumdisplay.php?fid=42)
+--- Thread: KC868-ASR ESPHome demo config for home assistant (/showthread.php?tid=2651)
KC868-ASR ESPHome demo config for home assistant - admin - 03-04-2023
esphome:
name: asr
esp32:
board: esp32dev
framework:
type: arduino
# Enable logging
logger:
# Enable Home Assistant API
api:
encryption:
key: "Xqy9f8iJ49cr7o8IWE1sFnG9EAEnxHVYlGUQBdnKE6Q="
ota:
password: "d13799179d079d89758ad1a0fd1c4560"
wifi:
ssid: KinCony
password: a12345678
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Asr Fallback Hotspot"
password: "KqbpeFnrzcWf"
captive_portal:
i2c:
sda: 26
scl: 27
scan: true
id: bus_a
switch:
- platform: gpio
pin: GPIO19
name: "asr-relay1"
- platform: gpio
pin: GPIO5
name: "asr-relay2"
- platform: gpio
pin: GPIO23
name: "asr-led1"
- platform: gpio
pin: GPIO22
name: "asr-led2"
- platform: gpio
pin: GPIO18
name: "asr-beep"
binary_sensor:
- platform: gpio
pin:
number: 0
inverted: true
name: "asr-button"
dallas:
- pin: 32
update_interval: 5s
sensor:
- platform: dallas
address: 0x7b062162cfe98128
name: "asr-t2"
KC868-ASR_ESPHome.txt (Size: 1.1 KB / Downloads: 274)