+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: 868-A4 pins for esphome (/showthread.php?tid=2669)
868-A4 pins for esphome - bria_s - 03-11-2023
Hi
what pins are used for the different input / outputs on the A4?
I would like make the complet unit with capabilities available to home assistant.
Right now i have the following:
Code:
esphome:
name: 868-a4
friendly_name: 868-A4
esp32:
board: esp32dev
framework:
type: arduino
# Enable logging
logger:
# Enable Home Assistant API
api:
encryption:
key: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
ota:
password: "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"
wifi:
ssid: "xxxxxxxx"
password: "xxxxxx"
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "868-A4 Fallback Hotspot"
password: "xxxxxxxxxxxx"
captive_portal:
switch:
- platform: gpio
name: "light1"
pin: 2
inverted: false
- platform: gpio
name: "light2"
pin: 15
inverted: false
- platform: gpio
name: "light3"
pin: 5
inverted: false
- platform: gpio
name: "light4"
pin: 4
inverted: false
binary_sensor:
- platform: gpio
name: "input1"
pin:
number: 36
inverted: true
- platform: gpio
name: "input2"
pin:
number: 39
inverted: true
- platform: gpio
name: "input3"
pin:
number: 27
inverted: true
- platform: gpio
name: "input4"
pin:
number: 14
inverted: true
output:
- platform: esp32_dac
pin: GPIO25
id: dac_output2
- platform: esp32_dac
pin: GPIO26
id: dac_output1
light:
- platform: monochromatic
output: dac_output1
name: "KC868-A4-DAC1"
gamma_correct: 2
id: dac_light1
- platform: monochromatic
output: dac_output2
name: "KC868-A4-DAC2"
id: dac_light2
sensor:
- platform: adc
pin: 34
name: "ADC-IN"
update_interval: 5s
dallas:
- pin: GPIO13RE: 868-A4 pins for esphome - admin - 03-11-2023
KC868-A4 ESP32 pin define: https://www.kincony.com/forum/showthread.php?tid=282
KC868-A4 for home asisstant ESPHome yaml file: https://www.kincony.com/forum/showthread.php?tid=2036
RE: 868-A4 pins for esphome - bria_s - 03-11-2023
(03-11-2023, 06:32 AM)admin Wrote: KC868-A4 ESP32 pin define: https://www.kincony.com/forum/showthread.php?tid=282
KC868-A4 for home asisstant ESPHome yaml file: https://www.kincony.com/forum/showthread.php?tid=2036
Thank you for replying.
yes i used the ESPHome yaml file as base for the code above.
But it is missing all the rest of the capabilities.
It would be great to have a esphome template for the KC868-AX with all the hardware capabilities exposed.
This would give new users a good starting point.
RE: 868-A4 pins for esphome - admin - 03-11-2023
actually the ADC,DAC, DS18B20, RF sender and RF receiver functions, we have made many demo yaml on different A series board. you can see different forum zone maybe you will find it. everyl KC868-A model zone, have ESPHome demo code download link.