+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A32M (https://www.kincony.com/forum/forumdisplay.php?fid=49)
+--- Thread: [Arduino source code for KC868-A32M]-04_RS485 (/showthread.php?tid=2882)
[Arduino source code for KC868-A32M]-04_RS485 - KinCony Support - 05-06-2023
[Arduino source code for KC868-A32M]-04_RS485
Code:
/*KC868-A32M RS485*/
#define A8M_RS485_RX 15
#define A8M_RS485_TX 13
void setup() {
Serial.begin(115200);
Serial2.begin(115200,SERIAL_8N1,A8M_RS485_RX,A8M_RS485_TX);//A8M
Serial2.println("A32M RS485 SEND is OK!!");
}
void loop() {
while(Serial2.available()>0)
{
Serial2.print((char)Serial2.read());
}
delay(200);
}