+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: Connecting the switch indicator LEDs (/showthread.php?tid=305)
Connecting the switch indicator LEDs - eladn - 06-21-2021
Hi.
The switch panels sold in Kincony's store have light indicators on them with a separate connection socket outlet. Does one of your products have a *digital output* option that can conditionally feed 12VDC to these LEDs? If not, is there another solution (assuming we don't want to connect it directly to the relay's output 320VAC nor having a dedicated expensive contactor for each led)?
Thanks!
RE: Connecting the switch indicator LEDs - admin - 06-22-2021
Yes, our switch panel have LED indicator. the economical feedback solution is :
let relay controller output DC12V -> middle relay or SSR or AC contactor -> load (like lamp, socket) this DC12V just connect with power supply, so that you not need every channel have a independent DC12V power supply for feedback.
the middle relay can use removable relay (AC230V 16A) , so that if broken, can easily to replace.
RE: Connecting the switch indicator LEDs - eladn - 06-22-2021
Thanks. This is indeed a good solution!