KC868-HA v2 firmware V200_231025 - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20) +--- Forum: KC868-HA /HA v2 (https://www.kincony.com/forum/forumdisplay.php?fid=55) +--- Thread: KC868-HA v2 firmware V200_231025 (/showthread.php?tid=3455)

KC868-HA v2 firmware V200_231025 - admin - 11-01-2023   HA485_KU_V200_231025.zip (Size: 6.66 KB / Downloads: 697) RE: KC868-HA v2 firmware V200_231025 - beon intelligent - 03-08-2025 hi what  do you use this file for, and to use it RE: KC868-HA v2 firmware V200_231025 - admin - 03-09-2025 this is firmware file, usually not need to use. when you buy a product, already have downloaded. RE: KC868-HA v2 firmware V200_231025 - beon intelligent - 03-09-2025 how can I reload this firmware ? RE: KC868-HA v2 firmware V200_231025 - admin - 03-09-2025 use kincony bootloader.exe download firmware by USB-RS485 adapter. RE: KC868-HA v2 firmware V200_231025 - phrfpeixoto - 05-25-2026 Hello! How to control the D1 to D6 output pins using the PC TOOL?  I have everything connected like this: I can see the PC TOOL changing when I connect K1 to GND, but I can't get my LEDs to turn on using the PC tool RE: KC868-HA v2 firmware V200_231025 - admin - 05-25-2026 which PC tool? take a photo of screen. RE: KC868-HA v2 firmware V200_231025 - phrfpeixoto - 05-26-2026 This tool     RE: KC868-HA v2 firmware V200_231025 - admin - 05-26-2026 PC tool just use for config. the Dx LED need feedback from kincony's relay controller message for LED ON/OFF.