+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: KCS save settings and upload to other board (/showthread.php?tid=3829)
KCS save settings and upload to other board - stanchiam - 12-12-2023
Hi,
We have a project where multiple rooms will be using the same card such as A16 and KCS firmware.
How do we save the settings in one of the board and use it for other rooms?
Is there a feature for saving and uploading of saved settings?
It is troublesome if there is hundreds of rooms and we need to configure one by one for each board.
Any help?
Thanks.
RE: KCS save settings and upload to other board - admin - 12-12-2023
if every board setting is same, it can use esp clone tool here is video tour how to ghost esp32: https://youtu.be/pUWbxX2K58A
RE: KCS save settings and upload to other board - stanchiam - 12-13-2023
(12-12-2023, 02:52 AM)admin Wrote: if every board setting is same, it can use esp clone tool here is video tour how to ghost esp32: https://youtu.be/pUWbxX2K58A
Thanks, that helps