+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: KCS firmware missing input options, only have reverse option (/showthread.php?tid=3846)
KCS firmware missing input options, only have reverse option - stanchiam - 12-13-2023
Hi,
I watched the guide and saw there is other options such as bind output, on off toggle.
But i dont see these except reverse. Is there something wrong with the firmware for A16 rev 1.5 board?
Tried both KCS_KC868_A16_V2.1.9 and KCS_KC868_A16_V2.2.2 firmware
(12-13-2023, 02:27 AM)stanchiam Wrote: Hi,
I watched the guide and saw there is other options such as bind output, on off toggle.
But i dont see these except reverse. Is there something wrong with the firmware for A16 rev 1.5 board?
Tried both KCS_KC868_A16_V2.1.9 and KCS_KC868_A16_V2.2.2 firmware
cannot do any binding for the input to the output
please help
RE: KCS firmware missing input options, only have reverse option - admin - 12-13-2023
KCS v2 firmware use by IFTTT command for INPUT and OUTPUT setting.
maybe you are watching V1 guide. here is V2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
RE: KCS firmware missing input options, only have reverse option - stanchiam - 12-14-2023
(12-13-2023, 04:53 AM)admin Wrote: KCS v2 firmware use by IFTTT command for INPUT and OUTPUT setting.
maybe you are watching V1 guide. here is V2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
Thank you, didn't noticed there is different guide for V1 and 2 firmware.