+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: Power supply for KC868-A8 (DRC-60) (/showthread.php?tid=4076)
Power supply for KC868-A8 (DRC-60) - baracha - 01-03-2024
Hi,
I want to use MeanWell DRC-60 with an integrated 12V battery for powering my KC868-A8.
The output voltage supposed to be adjustable (12-15V), but is over 13V at least this is what I see on my multimeter.
Is it safe to use it?
RE: Power supply for KC868-A8 (DRC-60) - admin - 01-04-2024
if not for long time is ok. but if relay is ON, work for long time, coin will hot. not very good.
RE: Power supply for KC868-A8 (DRC-60) - baracha - 01-04-2024
Thank you.
Are you able to advise how to read the state of AC OK i Battery Low from that power supply using KC868-A8?
BR
RE: Power supply for KC868-A8 (DRC-60) - admin - 01-04-2024
not need KinCony MB board for DC battery monitor, here is details: https://www.kincony.com/esp32-battery-monitor.html