+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: KC868-H32B Pro (/showthread.php?tid=4182)
KC868-H32B Pro - cezary16111 - 01-21-2024
I have a problem. I have KC868-H32B Pro, KC868-AK ESP32 Programmable Keyboard, KC868-HA V2. How to connect them together? In Home Assistant, KC868-H32B Pro works with MQTT normally, but I can't connect KC868-HA V2 additionally.
RE: KC868-H32B Pro - admin - 01-21-2024
KC868-AK connect to H32B Pro by RS232 cable directly, KC868-AK not need to use home assistant.
HAv2 can connect to your H32B Pro by RS485 cable directly, HAv2 not need to use home assistant.
RE: KC868-H32B Pro - cezary16111 - 01-21-2024
Ok, it works.
How to make KC868-HA v2 visible in HA?
RE: KC868-H32B Pro - admin - 01-21-2024
you can see this video tour: https://youtu.be/s5Htc43HqAc
RE: KC868-H32B Pro - cezary16111 - 01-21-2024
"Now I have a problem with the KC868-AK ESP32 Programmable Keyboard. When I press the button, it works like a momentary button (the relay turns on for a moment). Can you check the video?
When the Wifi Setting mode is enabled, there is such behavior in ESP32 development mode. When I turn it off, it works normally.
https://www.youtube.com/watch?v=mVFPB82LaKA
RE: KC868-H32B Pro - admin - 01-21-2024
do you have downloaded KCS firmware to AK or juse use original firmware.
if you are using original firmware, you need to config it before use, here is online guide: https://www.kincony.com/how-to-use-kc868-ak-programmable-keyboard.html
RE: KC868-H32B Pro - cezary16111 - 01-22-2024
I have one more question.
how to program KC868-H32B Pro to be visible in HA as ESP32?
RE: KC868-H32B Pro - admin - 01-22-2024
in H32B Pro ethernet config webpage, there is an option for RS485 type, just chose "special" . NOT chose "RTU".