+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A6 (https://www.kincony.com/forum/forumdisplay.php?fid=22)
+--- Thread: Help KC868-A6 (/showthread.php?tid=4187)
Pages:
1
2
RE: Help KC868-A6 - admin - 02-06-2024
![[Image: KC868-A6-1_05.jpg]](https://www.kincony.com/images/KC868-A6/KC868-A6-1_05.jpg)
IO-1 and IO-2 can use for wiegand. this just a label for first and second free GPIO name:
"IO-1": GPIO32
"IO-2": GPIO33
so you should define these 32,33 for esphome yaml.
KC868-A6 esp32 pin define details see here: https://www.kincony.com/forum/showthread.php?tid=1962
RE: Help KC868-A6 - eddiebullman - 02-06-2024
(02-06-2024, 11:12 AM)admin Wrote:
IO-1 and IO-2 can use for wiegand. this just a label for first and second free GPIO name:
"IO-1": GPIO32
"IO-2": GPIO33
so you should define these 32,33 for esphome yaml.
KC868-A6 esp32 pin define details see here: https://www.kincony.com/forum/showthread.php?tid=1962
Thank you
So if I am reading it right the 4 pin serial port on the board would be GPIO17 and GPIO16 ?
RE: Help KC868-A6 - admin - 02-07-2024
it's GPIO12 and GPIO13. see photo.
RE: Help KC868-A6 - eddiebullman - 02-07-2024
Thanks very much for your help once again now I can have a play
RE: Help KC868-A6 - admin - 02-07-2024
you are welcome.