+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16 (https://www.kincony.com/forum/forumdisplay.php?fid=25)
+--- Thread: KC868-16 ESPHOME firmware connection to node red (/showthread.php?tid=4273)
KC868-16 ESPHOME firmware connection to node red - Als Santa - 02-11-2024
I am making a kc868-16 connection with esphome firmware, to connect directly to node red, but the connection is unsuccessful, I have the latest KC firmware.
What should be the ports to use for the connection?
thank you so much
RE: KC868-16 ESPHOME firmware connection to node red - admin - 02-11-2024
if you want to use home assistant, you can use ESPHome.
if you want to use Node-red, you can download KCS firmware to ESP32, then use MQTT integrate to Node-red.
RE: KC868-16 ESPHOME firmware connection to node red - Als Santa - 02-12-2024
Perfect, Tks!!!
how do I do it, with: npm install node-red-contrib-kincony ?
RE: KC868-16 ESPHOME firmware connection to node red - admin - 02-12-2024
no, not install this node.
use MQTT for integration. this is yaml sample with A8S board: https://www.kincony.com/forum/showthread.php?tid=3274