+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: News (https://www.kincony.com/forum/forumdisplay.php?fid=5)
+--- Thread: KC868-H32BS smart controller module released (/showthread.php?tid=437)
Pages:
1
2
KC868-H32BS smart controller module released - admin - 08-13-2021
We have designed new smart controller KC868-H32BS. it have 6 digital input ports for sensors, 34 digital input ports for self-reset switch button and 32 P-MOSFET output ports, support use RF 433MHz wireless remoter. Add RS485 Modbus port. Also support MQTT and HTTP command for development.
![[Image: kc868-h32bs-details_01.jpg]](https://www.kincony.com/images/kc868-h32bs/kc868-h32bs-details_01.jpg)
RE: KC868-H32BS smart controller module released - papakigr - 08-16-2021
looks good, what is: P-MOSFET output ports?
RE: KC868-H32BS smart controller module released - admin - 08-16-2021
The metal–oxide–semiconductor field-effect transistor (MOSFET, MOS-FET, or MOS FET), also known as the metal–oxide–silicon transistor (MOS transistor, or MOS), is a type of insulated-gate field-effect transistor that is fabricated by the controlled oxidation of a semiconductor, typically silicon. The voltage of the covered gate determines the electrical conductivity of the device; this ability to change conductivity with the amount of applied voltage can be used for amplifying or switching electronic signals.
RE: KC868-H32BS smart controller module released - uvrtar - 08-17-2021
Hi,
is it possible with this controller to use it like dimmer D8 - when the dry contact is pressed the mosfet stays on, and when dry contact is relesed the mosfet is off?
Thank you.
RE: KC868-H32BS smart controller module released - admin - 08-17-2021
of course, it can use by dry contact for on and off.
RE: KC868-H32BS smart controller module released - Sten - 08-26-2021
Hi
Is it possible to add the TOGGLE function to the double click mode?
RE: KC868-H32BS smart controller module released - admin - 08-26-2021
yes, it support. here is video guide: https://youtu.be/32tl2SltmnU
RE: KC868-H32BS smart controller module released - papakigr - 02-04-2022
Hello,
can the mosfet give power to LED strip directly?
To give 12v or 24v and connect on the output the plus (+) of the LED strip?
RE: KC868-H32BS smart controller module released - admin - 02-05-2022
it's no problem, but how much amper you will use for LED strip, you should calculate it for chose your extend power supply.
RE: KC868-H32BS smart controller module released - papakigr - 02-05-2022
So if the led strip need for instance 200w and the power supply that i will connect is 300w, it should be ok to pass through the mosfet?
I see on the products parameter that the output load is 12/24v 500mA, that is why i am asking.