+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-HxB series Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=2)
+--- Thread: H32B-PRO Interlock Issue (/showthread.php?tid=5203)
H32B-PRO Interlock Issue - sebagarayco - 03-15-2024
Hi,
I want to interlock CH1 and CH2 so I'm using 11000000000000000000000000000000 in Config 01. I have a KC868-AK connected via RS485 to h32b pro
Problem:
- Turn on button 1 > Relay 1 turn on
- Turn on button 2 > Relay 1 turn off - Relay 2 turn on
- If I touch button 1 again > Relay 1 flash but indmediately turn off - Relay 2 remains turned on.
How to solve it?
Thank you
RE: H32B-PRO Interlock Issue - admin - 03-15-2024
take a video of your problem send to whatsapp number: +86-15381188302
RE: H32B-PRO Interlock Issue - sebagarayco - 03-19-2024
(03-15-2024, 01:40 PM)admin Wrote: take a video of your problem send to whatsapp number: +86-15381188302
Video sent!
thank you for support
RE: H32B-PRO Interlock Issue - admin - 03-19-2024
ok