ADR - ESP32 AC 220v dimmer arduino demo source code and library

Code:
#include <myADR.h>    ////RBDdimmer.h /////RBDmcuESP32.h



//Parameters

 int zeroCrossPin  = 25;

 int acdPin  = 33;



int add_pin = 15;

int dec_pin = 4;

 

int MIN_POWER  = 0;

int MAX_POWER  = 80;

int POWER_STEP  = 2;



//Variables

int power  = 0;



//Objects

dimmerLamp acd(acdPin,zeroCrossPin);



void setup(){

  //Init Serial USB

  Serial.begin(115200);

  Serial.println(F("Initialize System"));

  acd.begin(NORMAL_MODE, ON);

  

  acd.setPower(10); // setPower(0-100%);

  Serial.print("lampValue -> ");

  Serial.print(acd.getPower());

  Serial.println("%");



  pinMode(add_pin,INPUT_PULLUP);

  pinMode(dec_pin,INPUT_PULLUP);

      

}



void loop(){

  testDimmer();

}



int value = 0;



void testDimmer(){/* function testDimmer */ 

 

  int add = digitalRead(add_pin);

  int dec = digitalRead(dec_pin);



  if(add == LOW) value += 1;

  if(dec == LOW) value -= 1;

 

  if(value <= MIN_POWER)  value = MIN_POWER;

  else if(value>MAX_POWER) value = MAX_POWER;



  acd.setPower(value);



  delay(100);

  

////Sweep light power to test dimmer

 /*  for(power=MIN_POWER;power<=MAX_POWER;power+=POWER_STEP){

    acd.setPower(power); // setPower(0-100%);

      Serial.print("lampValue -> ");

      Serial.print(acd.getPower());

      Serial.println("%");

    delay(100);

  }



 for(power=MAX_POWER;power>=MIN_POWER;power-=POWER_STEP){

    acd.setPower(power); // setPower(0-100%);

      Serial.print("lampValue -> ");

      Serial.print(acd.getPower());

      Serial.println("%");

    delay(100);

  }*/

}