+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: Kcs firmware for kc868-a6 (/showthread.php?tid=5482)
Kcs firmware for kc868-a6 - Savino - 04-08-2024
Hi everyone.
I made configuration for Kc868-A6 board downloading kcs firmware binary file to the board.everything is OK.
I have only one question about wifi address.
What about to configure the board wifi in STA mode if I'd like to assign a static address in my local network to the board?
Actually I can't be able to find out this option in the kcs web server page.
So the board connect everytime to my local network using DHCP and I have to scan the net in order to know the ip address my router assigned to the board.....
Could anyone help me?
RE: Kcs firmware for kc868-a6 - admin - 04-08-2024
KCS firmware no static ip option for WiFi, But you can set a Static IP for KC868-A6 in router according to board's MAC. for example, this is DD-WRT system router, there is option:
check your KC868-A6 MAC address in KCS webpage "INDEX" page.
RE: Kcs firmware for kc868-a6 - Savino - 04-08-2024
Ok. Thanks