Smart Home Automation Forum
Kc868-AK - Printable Version

+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: Kc868-AK (/showthread.php?tid=5573)



Kc868-AK - ahmedwizza1 - 04-17-2024

HELLO ENGINEER 

Naw I am trying to us kc868-AK

Before RS232 worked with kc868-H32b perfectly. 

After I updated the esp firmware to config with home assistant suddenly stopped working  

And there was a blinking green light that also stopped. 

And it's now shown in the home assistant perfect

Can you help me 


RE: Kc868-AK - admin - 04-17-2024

because you have config the AK work for home assistant, so not support by H32B via RS232 directly.
if you want download before firmware to support H32B directly, here is "factory original firmware" for KC868-AK download:

.zip   kc868-ak-v1.0.7.zip (Size: 453.15 KB / Downloads: 72)


RE: Kc868-AK - ahmedwizza1 - 04-18-2024

Same rs485 can't work with homeassistant Sametime..


Or can work with homeassistant?


RE: Kc868-AK - admin - 04-18-2024

do you understand me? if you use ESPHome for home assistant, RS232 or RS485 all can't work with H32B directly.