+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: "KCS" v2.2.4 firmware BIN file download (/showthread.php?tid=6600)
"KCS" v2.2.4 firmware BIN file download - admin - 09-04-2024
Here is "KCS" firmware for KinCony KC868-A series (ESP32) board.
How to download and use, online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
v2.2.4 improment:
1. replaced new DHT sensor's driver.
2. fixed MQTT protocol format bug.
RE: "KCS" v2.2.4 firmware BIN file download - charlesrg - 10-02-2024
(09-04-2024, 11:32 PM)admin Wrote: Here is "KCS" firmware for KinCony KC868-A series (ESP32) board.
How to download and use, online guide: https://www.kincony.com/esp32-kcsv2-firmware.html
v2.2.4 improment:
1. replaced new DHT sensor's driver.
2. fixed MQTT protocol format bug.
Is it possible to know more details on "MQTT Protocol format bug" ?
RE: "KCS" v2.2.4 firmware BIN file download - admin - 10-03-2024
Missing comma
RE: "KCS" v2.2.4 firmware BIN file download - charlesrg - 10-04-2024
(10-03-2024, 03:58 AM)admin Wrote: Missing comma
I think it's an extra comma
I see what you're talking about I've had to use a modifier on nodered to fix it. When are you guys going to enable firmware update via the HTTP page ? Having to use a USB cable is not optimal
RE: "KCS" v2.2.4 firmware BIN file download - admin - 10-04-2024
maybe in furture will design a new way to update firmware.
RE: "KCS" v2.2.4 firmware BIN file download - yasin - 10-08-2024
Please check the firmware to A32M controller,to correct output number and activate inter lock.
RE: "KCS" v2.2.4 firmware BIN file download - enochjason - 10-10-2024
Hi, I installed V2.2.4 firmware n A6 board. I can see all inputs and outputs are working in monitior web page. However, When I short Digital inputs 1-6 with ground, the relays are not turning ON. Could you please help fixing this issue?
RE: "KCS" v2.2.4 firmware BIN file download - admin - 10-10-2024
(10-10-2024, 07:15 PM)enochjason Wrote: Hi, I installed V2.2.4 firmware n A6 board. I can see all inputs and outputs are working in monitior web page. However, When I short Digital inputs 1-6 with ground, the relays are not turning ON. Could you please help fixing this issue?
it's not a issue. you should create IFTTT command on "IFTTT" webpage, let INPUT trigger with OUTPUT. please see online guide at here: https://www.kincony.com/esp32-kcsv2-firmware.html
RE: "KCS" v2.2.4 firmware BIN file download - admin - 10-13-2024
(10-08-2024, 10:35 AM)yasin Wrote: Please check the firmware to A32M controller,to correct output number and activate inter lock.
updated new firmware at here: https://www.kincony.com/forum/showthread.php?tid=6870