Smart Home Automation Forum
Ghost trigger - Printable Version

+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A64 (https://www.kincony.com/forum/forumdisplay.php?fid=28)
+--- Thread: Ghost trigger (/showthread.php?tid=6868)



Ghost trigger - kbo - 10-12-2024

Hi,

I have implemented a kc-868-a64 in my home. It works great. It is integrated with Home Assistant to do some automation but the kc-868-a64 works on itself (see config below)

But I have a problem. Sometime when a push button is pressed, the configured light goes on BUT an other, not configured light sometimes also goes on.
I have this for some push buttons, not all. 

I tried to troubleshoot it but I can't find the issue.
Is there any way to troubleshoot this issue or is this a known issue ?

I have impulse relays so most of the outputs will turn off again.

My ESP HOME config is attached (I have redacted some fields)


RE: Ghost trigger - admin - 10-12-2024

can you take a video of your problem, send to whatsapp number: +86-15381188302


RE: Ghost trigger - kbo - 10-24-2024

I know how to take a video but the issue is there sometimes, not always. The problem is not consistently reproducible.

Is there any way to do some logging and do you know what to log ?

Greetings,
Kris Boeckx.


RE: Ghost trigger - admin - 10-24-2024

can you download KCS firmware to KC868-A64 for a testing?
just not use ESPHome, use KCS and config digital input ports trigger OUTPUT by IFTTT. here is online guide: https://www.kincony.com/esp32-kcsv2-firmware.html


RE: Ghost trigger - kbo - 10-30-2024

(10-24-2024, 11:51 PM)admin Wrote: can you download KCS firmware to KC868-A64 for a testing?
just not use ESPHome, use KCS and config digital input ports trigger OUTPUT by IFTTT. here is online guide: https://www.kincony.com/esp32-kcsv2-firmware.html

No I can't. The board is in production.
I need integration in Home Assistant.

If I have time, I will configure a "syslog" server and send all the messages to the syslog server.
I hope I can find what's wrong.

Greeting !