+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: Schematic and diagram (https://www.kincony.com/forum/forumdisplay.php?fid=33)
+--- Thread: KC868-H32B Pro relay positions (/showthread.php?tid=6888)
KC868-H32B Pro relay positions - lulu01 - 10-19-2024
Hello,
I wanted to replace a few relays that are dead on the KC868-H32B Pro, but I can't find their physical location.
For instance the one with the arrow in my picture is the number 1, but it is marked K23 on the PCB.
Do you have a diagram showing the actual number of each relay on the board?
Thank you
RE: KC868-H32B Pro relay positions - admin - 10-19-2024
which terminal port broken now? you can test by multi meter. let me , then i will check for you .
RE: KC868-H32B Pro relay positions - lulu01 - 10-19-2024
I am looking for relay 13 on this board, and relays 15, 25, 26 on another one.
RE: KC868-H32B Pro relay positions - admin - 10-19-2024
where you see the relay13,15,25,26? do you means you see the number on software window?
RE: KC868-H32B Pro relay positions - lulu01 - 10-19-2024
(10-19-2024, 11:08 AM)admin Wrote: where you see the relay13,15,25,26? do you means you see the number on software window?
For instance 25 is the one that is activated by the button 25 on the board. The relay in relation with the blue arrows on my picture below
RE: KC868-H32B Pro relay positions - lulu01 - 10-19-2024
I used a multimeter and here are my findings if it ever can help someone else. This is valid for the H32B Pro HW revision 2.3
RE: KC868-H32B Pro relay positions - admin - 10-20-2024
thanks for sharing your diagram. now you can replace relay , right?
RE: KC868-H32B Pro relay positions - lulu01 - 10-20-2024
Yes, I already did it on one of the cards.