+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-HA /HA v2 (https://www.kincony.com/forum/forumdisplay.php?fid=55)
+--- Thread: KC868-HAv2 phantom press in ESPhome (/showthread.php?tid=6924)
KC868-HAv2 phantom press in ESPhome - Dario - 10-26-2024
Hi,
Is there a way to optimise the Kincony KC868-HAv2? I currently use the new B16M and 2 of the KC868-HAv2 boards in test on ESPhome and I noticed that when I press and release the button quickly multiple times the B16M sees the button as pressed while it is not. When I press again it ofcourse gets reset.
It needs to be fool/child proof in my solution because I'm going to work with double/triple and long press commands in my solution.
Might the debounce setting do something?
Kind regards,
Dario
RE: KC868-HAv2 phantom press in ESPhome - admin - 10-26-2024
yes, you can set "debounce" with ESPHome.
now we are developing KCS v3 firmware for new B16M, KCS firmware can detect "double" click by B16M's digital input ports and make IFTTT. we will release KCS v3 in furture.