+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=62)
+--- Forum: F16 (https://www.kincony.com/forum/forumdisplay.php?fid=63)
+--- Thread: Trigger LED on Wall Switch Panel (/showthread.php?tid=7355)
Trigger LED on Wall Switch Panel - petermac - 01-11-2025
With the F16, without having digital out ports, is there any way to trigger the LED light on/off on wall switch panel?
RE: Trigger LED on Wall Switch Panel - admin - 01-11-2025
if relay output DC12v, it can feedback dc12v to wall switch panel.
but i think maybe we will make some new update for HAv2 module feedback relay state by RS485. we will save this idea.
RE: Trigger LED on Wall Switch Panel - MariusM - 03-27-2025
I have 2,4,6 gang metal switch wall , controls: server and AIO , How can i wire the feedback led for switch panel ?
I have connected the GND and DC to 12 V and the light of all buttons are yellow , so far ok.
When i wire the feedback D1 to output 1 from server, the LED is white without the output to be active, when i activate the output 1 the white led is off.
I want to set te wall switch as follow: when all lights off the button led will be all yellow, when an output is on the feedback led to be white.
RE: Trigger LED on Wall Switch Panel - admin - 03-27-2025
switch panel's GND need connect with AIO's power GND together.
here is video tour: https://youtu.be/hkU5keBTLf8
RE: Trigger LED on Wall Switch Panel - MariusM - 04-02-2025
Still not able to set.
I attached two pictures
When Relay is Off, LED D1 is ON
When Relay is ON, LED D1 is OFF
Looks like i need to invers somehow the signal.
Could you help?
RE: Trigger LED on Wall Switch Panel - admin - 04-02-2025
KC868-E16v2 relay's coin terminal connect to switch panel's "Dx". switch panel's COMMON connect to GND.