+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: Pull up on A8 (/showthread.php?tid=7492)
Pages:
1
2
RE: Pull up on A8 - admin - 01-31-2025
digital input use for switch button or any dry contact signal sensor, such as door sensor smoke sensor , window sensor. etc..
S1,S2 ... can use for DS1B20 temperature sensor, or DHT11, DHT22 temperature and humidity sensor.
RE: Pull up on A8 - heffneil - 02-06-2025
Thats what I am using a door switch and its flapping. I have another kincony that is connected to a button and its flapping while I am sleeping. I don't know if this is network causing this bouncing or if the devices are just not reliable.
RE: Pull up on A8 - heffneil - 02-27-2025
No response since after new years. I have big problems again.
RE: Pull up on A8 - admin - 02-28-2025
S1,S2 can use for 1-wire device, such as DS18B20, DHT11,DHT22 sensor.
S3,S3 use for digital input, such as dry contact signal.
RE: Pull up on A8 - heffneil - 03-03-2025
(02-28-2025, 12:00 AM)admin Wrote: S1,S2 can use for 1-wire device, such as DS18B20, DHT11,DHT22 sensor.
S3,S3 use for digital input, such as dry contact signal.
I am using closed contact / dry contact door sensors. I should be able to use ground to any of the other inputs, right?
RE: Pull up on A8 - admin - 03-03-2025
yes
RE: Pull up on A8 - heffneil - 03-03-2025
But I am getting terrible inconsistencies on not one but most devices.
RE: Pull up on A8 - heffneil - 03-08-2025
I have 5 of these in production and a box more. I want to return them all. I think in total I have 20. I can't rely on this and I highly recommend anyone who sees this to think twice. I have far too many mission (home) critical devices connected to these boards and I just can't let my septic system get wiped out because this doesn't respond or a flood in my home because the main water valve is unresponsive.