+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: Etgernet + wifi (/showthread.php?tid=7560)
RE: Etgernet + wifi - admin - 02-09-2025
https://www.kincony.com/forum/showthread.php?tid=7164
RE: Etgernet + wifi - kulibin - 02-09-2025
(02-09-2025, 02:45 AM)admin Wrote: https://www.kincony.com/forum/showthread.php?tid=7164
I did everything as you said but the device is not there. Here is a photo Please check
Code:
mqtt:
switch:
- name: 'a8-kcs-output-1'
unique_id: a8-kcs-output-1
state_topic: 'KC868_A8/9015066665C8/STATE'
command_topic: 'KC868_A8/9015066665C8/SET'
payload_on: '{"output1":{"value":true}}'
payload_off: '{"output1":{"value":false}}'
value_template: '{{ value_json.output1.value }}'
state_on: true
state_off: false
- name: 'a8-kcs-output-2'
unique_id: a8-kcs-output-2
state_topic: 'KC868_A8/9015066665C8/STATE'
command_topic: 'KC868_A8/9015066665C8/SET'
payload_on: '{"output2":{"value":true}}'
payload_off: '{"output2":{"value":false}}'
value_template: '{{ value_json.output2.value }}'
state_on: true
state_off: false
- name: 'a8-kcs-output-3'
unique_id: a8-kcs-output-3
state_topic: 'KC868_A8/9015066665C8/STATE'
command_topic: 'KC868_A8/9015066665C8/SET'
payload_on: '{"output3":{"value":true}}'
payload_off: '{"output3":{"value":false}}'
value_template: '{{ value_json.output3.value }}'
state_on: true
state_off: false
- name: 'a8-kcs-output-4'
unique_id: a8-kcs-output-4
state_topic: 'KC868_A8/9015066665C8/STATE'
command_topic: 'KC868_A8/9015066665C8/SET'
payload_on: '{"output4":{"value":true}}'
payload_off: '{"output4":{"value":false}}'
value_template: '{{ value_json.output4.value }}'
state_on: true
state_off: false
- name: 'a8-kcs-output-5'
unique_id: a8-kcs-output-5
state_topic: 'KC868_A8/9015066665C8/STATE'
command_topic: 'KC868_A8/9015066665C8/SET'
payload_on: '{"output5":{"value":true}}'
payload_off: '{"output5":{"value":false}}'
value_template: '{{ value_json.output5.value }}'
state_on: true
state_off: false
- name: 'a8-kcs-output-6'
unique_id: a8-kcs-output-6
state_topic: 'KC868_A8/9015066665C8/STATE'
command_topic: 'KC868_A8/9015066665C8/SET'
payload_on: '{"output6":{"value":true}}'
payload_off: '{"output6":{"value":false}}'
value_template: '{{ value_json.output6.value }}'
state_on: true
state_off: false
- name: 'a8-kcs-output-7'
unique_id: a8-kcs-output-7
state_topic: 'KC868_A8/9015066665C8/STATE'
command_topic: 'KC868_A8/9015066665C8/SET'
payload_on: '{"output7":{"value":true}}'
payload_off: '{"output7":{"value":false}}'
value_template: '{{ value_json.output7.value }}'
state_on: true
state_off: false
- name: 'a8-kcs-output-8'
unique_id: a8-kcs-output-8
state_topic: 'KC868_A8/9015066665C8/STATE'
command_topic: 'KC868_A8/9015066665C8/SET'
payload_on: '{"output8":{"value":true}}'
payload_off: '{"output8":{"value":false}}'
value_template: '{{ value_json.output8.value }}'
state_on: true
state_off: false
binary_sensor:
- name: 'a8-kcs-input-1'
unique_id: a8-kcs-input-1
state_topic: 'KC868_A8/9015066665C8/STATE'
value_template: '{{ value_json.input1.value }}'
payload_on: true
payload_off: false
- name: 'a8-kcs-input-2'
unique_id: a8-kcs-input-2
state_topic: 'KC868_A8/9015066665C8/STATE'
value_template: '{{ value_json.input2.value }}'
payload_on: true
payload_off: false
- name: 'a8-kcs-input-3'
unique_id: a8-kcs-input-3
state_topic: 'KC868_A8/9015066665C8/STATE'
value_template: '{{ value_json.input3.value }}'
payload_on: true
payload_off: false
- name: 'a8-kcs-input-4'
unique_id: a8-kcs-input-4
state_topic: 'KC868_A8/9015066665C8/STATE'
value_template: '{{ value_json.input4.value }}'
payload_on: true
payload_off: false
- name: 'a8-kcs-input-5'
unique_id: a8-kcs-input-5
state_topic: 'KC868_A8/9015066665C8/STATE'
value_template: '{{ value_json.input5.value }}'
payload_on: true
payload_off: false
- name: 'a8-kcs-input-6'
unique_id: a8-kcs-input-6
state_topic: 'KC868_A8/9015066665C8/STATE'
value_template: '{{ value_json.input6.value }}'
payload_on: true
payload_off: false
- name: 'a8-kcs-input-7'
unique_id: a8-kcs-input-7
state_topic: 'KC868_A8/9015066665C8/STATE'
value_template: '{{ value_json.input7.value }}'
payload_on: true
payload_off: false
- name: 'a8-kcs-input-8'
unique_id: a8-kcs-input-8
state_topic: 'KC868_A8/9015066665C8/STATE'
value_template: '{{ value_json.input8.value }}'
payload_on: true
payload_off: falseRE: Etgernet + wifi - admin - 02-09-2025
do you have replace the serial number for your own board? it used in mqtt topic.
RE: Etgernet + wifi - kulibin - 02-09-2025
Thanks for information !
I have two more questions
1) I installed wifi ssid (esp_garage) and wifi password, but when I open the list of networks, I do not see the esp_garage network. I only see KC868_A8-9015066665C8. Why isn't my network esp_garage?
2) When I connect to the network KC868_A8-9015066665C8 the Internet does not work.
I need to connect another ESP32 (wifi) over wifi to this network
Check photos please
RE: Etgernet + wifi - admin - 02-10-2025
if you want use internet, so NOT use AP mode, you should use "STA" mode, so that board will connect to your router.
RE: Etgernet + wifi - kulibin - 02-10-2025
(02-10-2025, 12:39 AM)admin Wrote: if you want use internet, so NOT use AP mode, you should use "STA" mode, so that board will connect to your router.
My module (KC868-A) is connected via ethernet and I want it to be an access point via WiFi for ESP32 I started this topic with this task!
RE: Etgernet + wifi - admin - 02-10-2025
the AP name can't be changed!
RE: Etgernet + wifi - kulibin - 02-10-2025
(02-10-2025, 09:16 AM)admin Wrote: the AP name can't be changed!
Ok Thanks but when I connect to the network KC868_A8-9015066665C8 the Internet does not work.
RE: Etgernet + wifi - admin - 02-10-2025
KC868_A8-9015066665C8 is ESP32 hotspot wifi . how it work with internet????? it's not a 4G module! only a esp32!
RE: Etgernet + wifi - kulibin - 02-11-2025
(02-10-2025, 11:47 AM)admin Wrote: KC868_A8-9015066665C8 is ESP32 hotspot wifi . how it work with internet????? it's not a 4G module! only a esp32!
Thans for information ю If I am using KC868_A8 module that is connected via ethernet. To connect to it ESP32 over WiFi, I must specify wifi ssid: and password. ssid I see (KC868_A8-9015066665C8) and which password to specify?