+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=60)
+--- Forum: B16 (https://www.kincony.com/forum/forumdisplay.php?fid=70)
+--- Thread: B16 ESPHome yaml for home assistant with tuya (/showthread.php?tid=7674)
B16 ESPHome yaml for home assistant with tuya - admin - 02-22-2025
Code:
esphome:
name: b16
friendly_name: b16
platformio_options:
board_build.extra_flags:
# WIFI_CONTROL_SELF_MODE = 0
# WIFI_CONTROL_SELF_MODE = 1
- "-DWIFI_CONTROL_SELF_MODE=1"
esp32:
board: esp32-s3-devkitc-1
framework:
type: arduino
external_components:
- source:
type: git
url: https://github.com/hzkincony/esphome-tuya-wifi-mcu
ref: v1.1.0
# Enable logging
# logger:
# hardware_uart: USB_SERIAL_JTAG
# Enable Home Assistant API
api:
encryption:
key: "WeVOuL5oNhjXcfzXtTirlOwvtWvCD5yqIxd3oV4es1k="
ethernet:
type: W5500
clk_pin: GPIO1
mosi_pin: GPIO2
miso_pin: GPIO41
cs_pin: GPIO42
interrupt_pin: GPIO43
reset_pin: GPIO44
i2c:
- id: bus_a
sda: 8
scl: 18
scan: true
frequency: 400kHz
pcf8574:
- id: 'pcf8574_hub_out_1' # for output channel 1-16
i2c_id: bus_a
address: 0x22
pcf8575: true
- id: 'pcf8574_hub_in_1' # for input channel 1-16
i2c_id: bus_a
address: 0x24
pcf8575: true
uart:
- id: uart_1 #RS485
baud_rate: 9600
debug:
direction: BOTH
dummy_receiver: true
after:
timeout: 10ms
tx_pin: 39
rx_pin: 38
- id: tuya_mcu_uart
tx_pin: GPIO16
rx_pin: GPIO17
baud_rate: 9600
tuya_wifi_mcu:
# tuya mcu product id
product_id: byxtsco8rwt4x8km
uart_id: tuya_mcu_uart
wifi_reset_pin: 28
wifi_led_pin: 16
switch:
- platform: uart
uart_id: uart_1
name: "RS485 Button"
data: [0x11, 0x22, 0x33, 0x44, 0x55]
- platform: gpio
name: "b16-output01"
id: "b16_output01"
pin:
pcf8574: pcf8574_hub_out_1
number: 0
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output1-tuya
dp_id: 1
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output01"
- platform: gpio
name: "b16-output02"
id: "b16_output02"
pin:
pcf8574: pcf8574_hub_out_1
number: 1
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output2-tuya
dp_id: 2
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output02"
- platform: gpio
name: "b16-output03"
id: "b16_output03"
pin:
pcf8574: pcf8574_hub_out_1
number: 2
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output3-tuya
dp_id: 3
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output03"
- platform: gpio
name: "b16-output04"
id: "b16_output04"
pin:
pcf8574: pcf8574_hub_out_1
number: 3
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output4-tuya
dp_id: 4
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output04"
- platform: gpio
name: "b16-output05"
id: "b16_output05"
pin:
pcf8574: pcf8574_hub_out_1
number: 4
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output5-tuya
dp_id: 5
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output05"
- platform: gpio
name: "b16-output06"
id: "b16_output06"
pin:
pcf8574: pcf8574_hub_out_1
number: 5
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output6-tuya
dp_id: 6
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output06"
- platform: gpio
name: "b16-output07"
id: "b16_output07"
pin:
pcf8574: pcf8574_hub_out_1
number: 6
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output7-tuya
dp_id: 101
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output07"
- platform: gpio
name: "b16-output08"
id: "b16_output08"
pin:
pcf8574: pcf8574_hub_out_1
number: 7
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output8-tuya
dp_id: 102
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output08"
- platform: gpio
name: "b16-output09"
id: "b16_output09"
pin:
pcf8574: pcf8574_hub_out_1
number: 8
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output9-tuya
dp_id: 103
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output09"
- platform: gpio
name: "b16-output10"
id: "b16_output10"
pin:
pcf8574: pcf8574_hub_out_1
number: 9
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output10-tuya
dp_id: 104
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output10"
- platform: gpio
name: "b16-output11"
id: "b16_output11"
pin:
pcf8574: pcf8574_hub_out_1
number: 10
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output11-tuya
dp_id: 105
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output11"
- platform: gpio
name: "b16-output12"
id: "b16_output12"
pin:
pcf8574: pcf8574_hub_out_1
number: 11
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output12-tuya
dp_id: 106
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output12"
- platform: gpio
name: "b16-output13"
id: "b16_output13"
pin:
pcf8574: pcf8574_hub_out_1
number: 12
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output13-tuya
dp_id: 107
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output13"
- platform: gpio
name: "b16-output14"
id: "b16_output14"
pin:
pcf8574: pcf8574_hub_out_1
number: 13
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output14-tuya
dp_id: 108
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output14"
- platform: gpio
name: "b16-output15"
id: "b16_output15"
pin:
pcf8574: pcf8574_hub_out_1
number: 14
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output15-tuya
dp_id: 109
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output15"
- platform: gpio
name: "b16-output16"
id: "b16_output16"
pin:
pcf8574: pcf8574_hub_out_1
number: 15
mode: OUTPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-output16-tuya
dp_id: 110
# hide from homeassistant ui
internal: true
# bind other switch, sync state
bind_switch_id: "b16_output16"
binary_sensor:
- platform: gpio
name: "b16-input01"
id: "b16_input01"
pin:
pcf8574: pcf8574_hub_in_1
number: 0
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input1-tuya
dp_id: 111
bind_binary_sensor_id: b16_input01
internal: true
- platform: gpio
name: "b16-input02"
id: "b16_input02"
pin:
pcf8574: pcf8574_hub_in_1
number: 1
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input2-tuya
dp_id: 112
bind_binary_sensor_id: b16_input02
internal: true
- platform: gpio
name: "b16-input03"
id: "b16_input03"
pin:
pcf8574: pcf8574_hub_in_1
number: 2
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input3-tuya
dp_id: 113
bind_binary_sensor_id: b16_input03
internal: true
- platform: gpio
name: "b16-input04"
id: "b16_input04"
pin:
pcf8574: pcf8574_hub_in_1
number: 3
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input4-tuya
dp_id: 114
bind_binary_sensor_id: b16_input04
internal: true
- platform: gpio
name: "b16-input05"
id: "b16_input05"
pin:
pcf8574: pcf8574_hub_in_1
number: 4
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input5-tuya
dp_id: 115
bind_binary_sensor_id: b16_input05
internal: true
- platform: gpio
name: "b16-input06"
id: "b16_input06"
pin:
pcf8574: pcf8574_hub_in_1
number: 5
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input6-tuya
dp_id: 116
bind_binary_sensor_id: b16_input06
internal: true
- platform: gpio
name: "b16-input07"
id: "b16_input07"
pin:
pcf8574: pcf8574_hub_in_1
number: 6
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input7-tuya
dp_id: 117
bind_binary_sensor_id: b16_input07
internal: true
- platform: gpio
name: "b16-input08"
id: "b16_input08"
pin:
pcf8574: pcf8574_hub_in_1
number: 7
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input8-tuya
dp_id: 118
bind_binary_sensor_id: b16_input08
internal: true
- platform: gpio
name: "b16-input09"
id: "b16_input09"
pin:
pcf8574: pcf8574_hub_in_1
number: 8
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input9-tuya
dp_id: 119
bind_binary_sensor_id: b16_input09
internal: true
- platform: gpio
name: "b16-input10"
id: "b16_input10"
pin:
pcf8574: pcf8574_hub_in_1
number: 9
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input10-tuya
dp_id: 120
bind_binary_sensor_id: b16_input10
internal: true
- platform: gpio
name: "b16-input11"
id: "b16_input11"
pin:
pcf8574: pcf8574_hub_in_1
number: 10
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input11-tuya
dp_id: 121
bind_binary_sensor_id: b16_input11
internal: true
- platform: gpio
name: "b16-input12"
id: "b16_input12"
pin:
pcf8574: pcf8574_hub_in_1
number: 11
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input12-tuya
dp_id: 122
bind_binary_sensor_id: b16_input12
internal: true
- platform: gpio
name: "b16-input13"
id: "b16_input13"
pin:
pcf8574: pcf8574_hub_in_1
number: 12
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input13-tuya
dp_id: 123
bind_binary_sensor_id: b16_input13
internal: true
- platform: gpio
name: "b16-input14"
id: "b16_input14"
pin:
pcf8574: pcf8574_hub_in_1
number: 13
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input14-tuya
dp_id: 124
bind_binary_sensor_id: b16_input14
internal: true
- platform: gpio
name: "b16-input15"
id: "b16_input15"
pin:
pcf8574: pcf8574_hub_in_1
number: 14
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input15-tuya
dp_id: 125
bind_binary_sensor_id: b16_input15
internal: true
- platform: gpio
name: "b16-input16"
id: "b16_input16"
pin:
pcf8574: pcf8574_hub_in_1
number: 15
mode: INPUT
inverted: true
- platform: tuya_wifi_mcu
name: b16-input16-tuya
dp_id: 126
bind_binary_sensor_id: b16_input16
internal: true
##pull-up resistance on PCB
- platform: gpio
name: "b16-W1-io48"
pin:
number: 48
inverted: true
- platform: gpio
name: "b16-W1-io47"
pin:
number: 47
inverted: true
- platform: gpio
name: "b16-W1-io40"
pin:
number: 40
inverted: true
- platform: gpio
name: "b16-W1-io7"
pin:
number: 7
inverted: true
## without resistance on PCB
- platform: gpio
name: "b16-io13"
pin:
number: 13
inverted: false
- platform: gpio
name: "b16-io14"
pin:
number: 14
inverted: false
- platform: gpio
name: "b16-21"
pin:
number: 21
inverted: false
- platform: gpio
name: "b16-0"
pin:
number: 0
inverted: false
ads1115:
- address: 0x48
sensor:
- platform: ads1115
multiplexer: 'A0_GND'
gain: 6.144
resolution: 16_BITS
name: "ADS1115 Channel A0-GND"
update_interval: 5s
- platform: ads1115
multiplexer: 'A1_GND'
gain: 6.144
name: "ADS1115 Channel A1-GND"
update_interval: 5s
- platform: ads1115
multiplexer: 'A2_GND'
gain: 6.144
name: "ADS1115 Channel A2-GND"
update_interval: 5s
- platform: ads1115
multiplexer: 'A3_GND'
gain: 6.144
name: "ADS1115 Channel A3-GND"
update_interval: 5s
web_server:
port: 80
font:
- file: "gfonts://Roboto"
id: roboto
size: 20
display:
- platform: ssd1306_i2c
i2c_id: bus_a
model: "SSD1306 128x64"
address: 0x3C
lambda: |-
it.printf(0, 0, id(roboto), "KinCony B16");
B16-HA.txt (Size: 13.84 KB / Downloads: 316)
RE: B16 ESPHome yaml for home assistant with tuya - ck1 - 07-03-2025
I have purchased a B16. And I run this YAML file to flash. These are the errors I have received. Attached is the log.
logs_b16_run.txt (Size: 28.98 KB / Downloads: 116)
1. WARNING Using `switch.SWITCH_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. Please use `switch.switch_schema(...)` instead. If you are seeing this, report an issue to the external_component author and ask them to update it. https://developers.esphome.io/blog/2025/05/14/_schema-deprecations/. Component using this schema: tuya_wifi_mcu
and then this:
2.
Compiling .pioenvs/b16/FrameworkArduino/FunctionalInterrupt.cpp.o
.piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaWifi.cpp: In constructor 'TuyaWifi::TuyaWifi()':
.piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaWifi.cpp:34:33: error: no matching function for call to 'TuyaUart:
et_serial(USBCDC*)' tuya_uart.set_serial(&Serial);
^
In file included from .piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaWifi.h:19,
from .piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaWifi.cpp:15: .piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaUart.h:46:10: note: candidate: 'void TuyaUart:
et_serial(HardwareSerial*)'void set_serial(TY_UART *serial);
^~~~~~~~~~
.piolibdeps/b16/Tuya_WiFi_MCU_SDK/src/TuyaUart.h:46:10: note: no known conversion for argument 1 from 'USBCDC*' to 'HardwareSerial*'
*** [.pioenvs/b16/libe10/Tuya_WiFi_MCU_SDK/TuyaWifi.cpp.o] Error 1
========================= [FAILED] Took 238.15 seconds =========================
RE: B16 ESPHome yaml for home assistant with tuya - admin - 07-03-2025
later we will upload new file, because esphome have updated.
RE: B16 ESPHome yaml for home assistant with tuya - ck1 - 07-09-2025
(07-03-2025, 08:05 AM)admin Wrote: later we will upload new file, because esphome have updated.
Still waiting for the new YAML file please. Thank you
RE: B16 ESPHome yaml for home assistant with tuya - admin - 07-09-2025
tested compile with esphome 2025.6.3 without any issue.
RE: B16 ESPHome yaml for home assistant with tuya - ck1 - 07-09-2025
(07-09-2025, 11:51 AM)admin Wrote: tested compile with esphome 2025.6.3 without any issue.
ok, thank you. I have tried again and seems that all is well.
RE: B16 ESPHome yaml for home assistant with tuya - ck1 - 07-15-2025
Sir, I'm enjoying my B16. Thank you for giving us the opportunity to play with smart home by your consistent innovations. I even more appreciate your sharing of knowledge. Thank you!
I'd like to just say this for this warning keeps coming up. We are still getting this messages every time we compile our YAML file. It is not an error, but just a warning. I thought you might like to update it.
WARNING Using `switch.SWITCH_SCHEMA` is deprecated and will be removed in ESPHome 2025.11.0. Please use `switch.switch_schema(...)` instead. If you are seeing this, report an issue to the external_component author and ask them to update it. https://developers.esphome.io/blog/2025/...recations/. Component using this schema: tuya_wifi_mcu
Again, I enjoy your products very much. You at Kincony are so innovative, hardworking and generous to share knowledge. And you always answer very quickly.
Thank you. Have a good day!
RE: B16 ESPHome yaml for home assistant with tuya - admin - 07-16-2025
yes, we will update this in future, because ESPHome have some new update. But now it also can compile yaml file without issue.