+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=72)
+--- Forum: TA (https://www.kincony.com/forum/forumdisplay.php?fid=76)
+--- Thread: More inputs please (/showthread.php?tid=8006)
More inputs please - kbo - 04-20-2025
Hi,
I need more inputs for my alarm central. 32 inputs should be enough.
Is there a larger (more inputs) version planned ?
Greetings,
Kris B.
RE: More inputs please - admin - 04-20-2025
you can use A32M board, that have 32 channel digital input.
RE: More inputs please - sserry - 06-07-2025
(04-20-2025, 11:13 PM)admin Wrote: you can use A32M board, that have 32 channel digital input.
Hello,
I also need this but A32M board seems to have 32 channel outputs and not inputs. (https://www.kincony.com/32-channel-esp32-mosfet-board.html)
Can you use the sensor inputs also for ADC inputs please? If so .. how?
Thanks
RE: More inputs please - admin - 06-07-2025
will release new board T32M soon, ESP32S3 with 32 channel digital input and digital output.
RE: More inputs please - huthut72 - 11-30-2025
I am brainstorming a DIY Alarm setup with the TA board and some more inputs would be nice to have, is it possible to install some kind of expansion board through the GPIO pins?
I'm new on the whole electronics bandwagon so sorry for maybe a silly question.
RE: More inputs please - admin - 12-01-2025
what input type you want more? sensor? or dry contact?
RE: More inputs please - huthut72 - 12-01-2025
(12-01-2025, 02:28 AM)admin Wrote: what input type you want more? sensor? or dry contact?
Sorry, should have specified it! Dry contacts for more alarm sensors.
RE: More inputs please - admin - 12-01-2025
we are developing new KCS v3 firmware, will support free gpio as digital input ports for extend.
now if you use by esphome, you can use DI8 i2c 8 channel digital input module for extension.