create cover buttons for two relay using MQTT

Code:
mqtt:

  cover:

      name: "MQTT Cover"

      command_topic: 'A32PRO/DCDA0C7B8568/SET'

      state_topic: 'A32PRO/DCDA0C7B8568/STATE'

     # availability:

     # - topic: "home-assistant/cover/availability"

      qos: 0

      retain: true

      payload_open: '{"output1":{"value":true}}'

      payload_close: '{"output2":{"value":true}}'

      payload_stop: '{"output1":{"value":false}, "output2":{"value":false}}'



      value_template: >

        {% if value_json.output1.value and not value_json.output5.value %}

          open

        {% elif value_json.output5.value and not value_json.output1.value %}

          closed

        {% elif not value_json.output1.value and not value_json.output5.value %}

          stopped

        {% else %}

          unknown

        {% endif %}



      state_opening: "open"

      state_closing: "closed"

      state_stopped: "stopped"



      payload_available: "online"

      payload_not_available: "offline"

      optimistic: false





  switch:

   - name: 'a32pro-kcs-output-1'

     unique_id: a32pro-kcs-output-1

     state_topic: 'A32PRO/DCDA0C7B8568/STATE'

     command_topic: 'A32PRO/DCDA0C7B8568/SET'

     payload_on:  '{"output1":{"value":true}}'

     payload_off:  '{"output1":{"value":false}}'

     value_template: '{{ value_json.output1.value }}'

     state_on: true

     state_off: false



   - name: 'a32pro-kcs-output-2'

     unique_id: a32pro-kcs-output-2

     state_topic: 'A32PRO/DCDA0C7B8568/STATE'

     command_topic: 'A32PRO/DCDA0C7B8568/SET'

     payload_on:  '{"output2":{"value":true}}'

     payload_off:  '{"output2":{"value":false}}'

     value_template: '{{ value_json.output2.value }}'

     state_on: true

     state_off: false