+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: 868-a16 or a32 Poe question (/showthread.php?tid=8199)
868-a16 or a32 Poe question - wchpikus - 06-18-2025
Hello,
Could I connect this board to passie Poe switch?
Some devices has terminator resistors and do not like Poe power..
Second question is, lan is connector with Poe (not used) or not?
I like to add Poe power adaptor.
RE: 868-a16 or a32 Poe question - admin - 06-19-2025
KC868-A16 and KC868-A32 not support POE. But you can connect to POE switch use as a common device.
RE: 868-a16 or a32 Poe question - wchpikus - 06-19-2025
Hmm,i looking On lan socket and pin 4 5 and 7 8 are connected inside via 75ohm to gnd..
So no possible to outside socket get poe power.
I thing connection to passive power damage the resistors.
https://ibb.co/tw6HnBjz
RE: 868-a16 or a32 Poe question - savingguillemot - 10-01-2025
I believe that the resistors are harmed by the connection to passive power.