+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16v3 (https://www.kincony.com/forum/forumdisplay.php?fid=68)
+--- Thread: Tasmota Template (/showthread.php?tid=8395)
Tasmota Template - bob_tm - 07-31-2025
Hello,
How to convert this information to Tasmota components
Ethernet (W5500) I/O define:
type: W5500
clk_pin: GPIO42
mosi_pin: GPIO43
miso_pin: GPIO44
cs_pin: GPIO15
interrupt_pin: GPIO2
reset_pin: GPIO1
?
RE: Tasmota Template - admin - 07-31-2025
i have not tested w5500 with tasmota, maybe you can try as this way: https://github.com/arendst/Tasmota/discussions/18207
RE: Tasmota Template - bob_tm - 08-01-2025
* Used SPI W5500
* SPI_MOSI
* SPI_MISO
* SPI_CLK
* SPI_RST = Tasmota ETH_POWER
* SPI_IRQ = Tasmota ETH_MDIO
* SPI_CS = Tasmota ETH_MDC
execute command EthType 8 to select W5500.
tnx. works!
RE: Tasmota Template - admin - 08-01-2025
ok, good.
RE: Tasmota Template - Ndogo - 09-08-2025
please add v3 template like this https://templates.blakadder.com/kincony_KC868-A16.html