+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: KC868-A8V3 and ESPHome firmware (/showthread.php?tid=8465)
KC868-A8V3 and ESPHome firmware - JuDie07 - 08-25-2025
I want to load the config yaml provided by you with a DS18b20:
I get this error message:
RE: KC868-A8V3 and ESPHome firmware - admin - 08-25-2025
do you want to use tuya app? if you don't want use it. you can disable it.
RE: KC868-A8V3 and ESPHome firmware - JuDie07 - 08-25-2025
(08-25-2025, 10:39 AM)admin Wrote: do you want to use tuya app? if you don't want use it. you can disable it.
No, Tuya app. APP, how and where can it be deactivated?
RE: KC868-A8V3 and ESPHome firmware - JuDie07 - 08-26-2025
Hello,
after reinstalling the original "config yaml file for ESPHome" -> https://www.kincony.com/forum/showthread.php?tid=7971 I get the following error!
When I try to view the LOGS, I get another error message!
RE: KC868-A8V3 and ESPHome firmware - admin - 08-27-2025
tested with 3pcs of DS18B20 for KC868-A8v3 using ESPHome.
S4:GPIO14
S3:GPIO48
S2:GPIO13
S1:GPIO40
esphome yaml file:
A8v3-DS18B20-ESPHome-yaml.txt (Size: 8.48 KB / Downloads: 130)
esphome key point:
Code:
sensor:
- platform: dallas_temp
one_wire_id: bus_S4
name: "S4 Temperature"
update_interval: 10s
- platform: dallas_temp
one_wire_id: bus_S3
name: "S3 Temperature"
update_interval: 10s
- platform: dallas_temp
one_wire_id: bus_S2
name: "S2 Temperature"
update_interval: 10s
one_wire:
- platform: gpio
pin: GPIO14
id: bus_S4
- platform: gpio
pin: GPIO48
id: bus_S3
- platform: gpio
pin: GPIO13
id: bus_S2