+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16S (https://www.kincony.com/forum/forumdisplay.php?fid=47)
+--- Thread: DS3231 RTC module (/showthread.php?tid=8480)
DS3231 RTC module - rosnoteh - 08-31-2025
how is the time set in the ds3231 module?
RE: DS3231 RTC module - admin - 09-01-2025
you can write your own arduino source code.
RE: DS3231 RTC module - rosnoteh - 09-02-2025
KCS v2firmware supports ds3231 module?
RE: DS3231 RTC module - admin - 09-02-2025
KCS v2 not support directly. KCS v3 support DS3231 directly.
RE: DS3231 RTC module - rosnoteh - 04-24-2026
For information. The KC868-A16 with KCS v2 firmware supports an internal clock in esp32. The watch starts when connected to the Internet. The clock is ticking accurately. When the power is turned off, they are reset. I'm using backup power. If the KC868-A16 works offline, the watch can be started by connecting to the KC868-A16 via a smartphone.