+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A4S (https://www.kincony.com/forum/forumdisplay.php?fid=41)
+--- Thread: Kincony A4s (/showthread.php?tid=9489)
Kincony A4s - Ashiq - 06-15-2026
"Is there a feature or logic in the Kincony A4S firmware that supports the following switch behavior: a single press toggles the light ON/OFF, while pressing and holding increases the brightness, and releasing then pressing and holding again decreases the brightness?"
RE: Kincony A4s - admin - 06-15-2026
no this function. you can config by ESPHome.
KCS v3 have this function, but use by ESP32S3 board.